Description
CNB-210E Back-up Power for Access
General introduction:
Be made of superior components with international hi-tech; Quality guaranteed.
Application:
Be applied to building talkbacks and kinds of access controllers, especially electric locks and bolts.
Function:
Power input: standard 220Vac, 50Hz: Power Output: Standard 12VDC, 3A/5A; Control electric locks or bolts directly: Reduce the load of access controller, Save project wires: Lower potential trouble: Have output NC/NO: Has delay control circuit: Unlock delay time is in 0-15S: Short circuit protection.
Dimension:
176(L) X 78(W) X 70(H)m
Weight:
1.05kg
Diagram:
Wires Connection
1–2: NO& COM terminal, normally no output;Press button to output DC12V (0 – 15s time delay);terminal is +(cathode), terminal 2 is -(anode).
2–3: NC&COM terminal, normally output DC12V,Press button to cut off power supply(O 15s)time delay),terminal 3 is +(cathode), terminal 2 is-(anode).
4–5: DC12V Output terminal 4 is +(cathode), terminal 5 is-(anode).
5–6: Connect exit button or time attendance.
7–8: Output DC12V to open the door, especially applied to the access controller which output DC12V to control electric bolts or locks directly.
9–10: DC 12V to control electric bolts or locks directly. K123: RF control to cout off power supply.
