Description
8000 Series Vertical Rod Type (8000V & F8000V)
Specifications
Material :
push ber – steel pressed or stainless steel pressed
Head Cover – Steel pressed or stainless steel pressed
Spring – Stainless steel
Latch Bolt :
3/4′ throw, stainless steel
Dead Latch bolt :
5/8″, steel
Strike :
for 5/8″ stop. Plus shim for 1/2″ stop
Projection :
2-1/2″ maximum, 1-7/8″ pressed
Reversible :
Non-handed, reversible for all functions and trims
For Door :
1-3/4″ thick of wood or metal door. specify thickness if other than 1-3/4″
Backset :
2-3/4″ standard
door width :
3′ standard for door width of 2′-6′ to 3′-0″,4 standard for door width of 3′-0″ to 4′-0″
Stile :
4-1/4″ minimum.
Top and bottom rod length for 7′ door :
Top rod 45-1/4″, bottom rod 34″, other length upon request and discussion
Mounting height :
40-5/16″ from CL to finished floor recommended
Mounting :
Furnished standard with sheet metal & machine screws or SNB as option
Cylinders :
For trim, knob, lever & thumb-piece type “schlage C” key way
Dogging :
1/4 turn, hex key dogging on non-fire labeled device
UL Listed :
For “panic hardware” and “UL”. labeled (1.5 hours) fire exit hardware
Operation :
inside by slight pressure on any point of the push bar all time
