Description
7100 Vertical Rod type (7100V & F7100V)
Specifications
Material :
push ber – steel pressed or stainless steel pressed
Head Cover – Steel pressed or stainless steel pressed
Spring – Stainless steel
Latch Bolt :
5/8′ throw, stainless steel
Dead Latch bolt :
5/8″, steel
Strike :
for 5/8″ stop.
Projection :
2-1/2″ maximum, 1-7/8″ pressed
Reversible :
Non-handed, reversible for all functions and trims
For Door :
1-3/4″ thick of wood or metal door. specify thickness if other than 1-3/4″
door width :
3′ standard for door width of 2′-8″ to 3′-0″,4′ standard for door width of 3′-8″ to 4′-0″
Stile :
4-1/4″ minimum.
Top and bottom rod length for 7′ door :
Top rod 35-1/3″, bottom rod 31-1/4″
Top and bottom rod length for 8′ door :
Top rod 47-2/3″, bottom rod 31-1/4″
Mounting height :
40-5/16″ from CL to finished floor recommended
Mounting :
Furnished standard with sheet metal & machine screws or SNB as option
Cylinders :
For trim, knob, lever & thumb-piece type “schlage C” key way
Dogging :
1/4 turn, hex key dogging on non-fire labeled device
UL Listed :
For “panic hardware” and “UL”. labeled (3 hours) fire exit hardware. (testing)
Ansi standard:
A156.3 grade 1
Operation :
inside by slight pressure on any point of the push bar all time
Head cover :
Big 8-1/2″ x 2-3/4″ x 2-1/2″ (216mm x 68.3mm x 62mm) &
Small 6-1/3″ x 2-3/4″ x 2-1/2″ (160mm x 68.2mm x 60mm)
Standard Finishes :
US26, US26D, US32D (or other finishes upon request & discussion)
